M & H Appliance

    M & H Appliance

    Polk Audio® Vanishing® Series 6.5" White In-Wall Speaker

    Model #: 265-LS

    $379.00

    At a Glance

    Vanishing Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.

    WarningProposition 65 Warning for California Residents
    Polk Audio® Vanishing® Series 6.5" White In-Wall Speaker

    General Specs

    Product Weight (lbs.)9
    MPNAW7265
    Color Finish NameWhite
    Manufacturer WarrantyLimited Lifetime
    RMS Power Handling (Watts)100
    ColorWhite
    Impedance8 ohms
    Maximum Power Handling (Watts)100
    Speaker TypeIn-Wall Speakers
    Depth (in.)3
    Height (in.)20.87
    Width (in.)8.87
    Woofer Size6.5

    General

    Connector TypeGold-plated spring-loaded posts
    Tweeter CompositionSilk Radiating
    Woofer Composition Polypropylene Cone
    Sold AsEach
    ColorWhite
    Optional Accessories(1) PB LC265i Pre-Construction Bracket - Sold Separately
    AvailabilityUS; Internationally
    OrientationHorizontal
    Height20.875" (53.02 cm)
    Width8.875" (22.54 cm)
    Depth3.75" (9.53 cm)
    Weight9 lbs (4.08 kg)
    Driver Enclosure TypePower Port Bass Vented
    Driver Complement(1) 1" (2.54 cm) d (Round) Dynamic Balance ring radiator - Tweeter; (2) 6.5" (16.51 cm) d (Round) Dynamic Balance aerated polypropylene cone and rubber surround - Mid/Woofer
    Total Frequency Response28 Hz - 33,000 Hz
    Nominal Impedance8 ohms
    Sensitivity (1 watt @ 1 meter)91 dB
    Lower and Upper -3dB Limits41 Hz - 29,000 Hz
    Recommended Amplifier Power Per Channel10 watts - 200 watts
    Speaker Inputs(1) Pair of Spring-loaded binding posts - Gold-plated
    ShapeRectangle
    Dimensions19.188" (48.74 cm) h x 7.25" (18.42 cm) w
    Flush Mounting Depth3" (7.62 cm)

    Polk Audio® Vanishing® Series 6.5" White In-Wall Speaker

    Model #: 265-LS
    25055
    Model #: 265-LS
    Polk Audio
    $379.00

    Available in Store Only

    $379.00

    At a Glance

    Vanishing Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.

    Get to know this product.

    Polk’s patented Power Port® bass venting

    Exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings

    Two 6.5" Dynamic Balance mid/woofers

    Dynamic Balance ring radiator tweeter

    Vanishing Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.

    Painted to match your décor, Vanishing Series built-in speakers are virtually indistinguishable from their surroundings.

    Enhanced, reengineered ring radiator tweeters extend top-end response for incredible details and realistic imaging.

    Reflective surfaces in rooms can make sound brighter and cause image distortion. Engaging the Vanishing reflective room compensation feature (by selecting the low setting) lowers the tweeter level to compensate for reflective surfaces. Vanishing reflective room compensation is a custom audio control that cuts the level only in the 4-5kHz range, exactly where reflectivity destroys sound quality. Outside this narrow 1kHz band, the tweeter retains its detailed and accurate high frequency response, for no loss of realistic musical details.

    Vanishing Series LS speakers are timbre-matched to Polk LSi speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.

    If positioning limitations demand that your loudspeakers be installed closer than 2 feet from side walls, the proximity of the surface can result in a response bump between 50 and 200Hz. This can create boomy sound. The Vanishing wall distance toggle switch is a custom audio control that adjusts the crossover to flatten response and tune out boominess, without sacrificing deep bass response, for more lifelike sound and more flexible placement.

    PowerPort bass venting is Polk’s patented design for smoothly transitioning the air flow from the port into your listening area, eliminating turbulence and distortion, for bigger, more efficient, deep bass impact.

    Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

    Useful Documents
    Specifications

    General Specs

    Product Weight (lbs.)9
    MPNAW7265
    Color Finish NameWhite
    Manufacturer WarrantyLimited Lifetime
    RMS Power Handling (Watts)100
    ColorWhite
    Impedance8 ohms
    Maximum Power Handling (Watts)100
    Speaker TypeIn-Wall Speakers
    Depth (in.)3
    Height (in.)20.87
    Width (in.)8.87
    Woofer Size6.5

    General

    Connector TypeGold-plated spring-loaded posts
    Tweeter CompositionSilk Radiating
    Woofer Composition Polypropylene Cone
    Sold AsEach
    ColorWhite
    Optional Accessories(1) PB LC265i Pre-Construction Bracket - Sold Separately
    AvailabilityUS; Internationally
    OrientationHorizontal
    Height20.875" (53.02 cm)
    Width8.875" (22.54 cm)
    Depth3.75" (9.53 cm)
    Weight9 lbs (4.08 kg)
    Driver Enclosure TypePower Port Bass Vented
    Driver Complement(1) 1" (2.54 cm) d (Round) Dynamic Balance ring radiator - Tweeter; (2) 6.5" (16.51 cm) d (Round) Dynamic Balance aerated polypropylene cone and rubber surround - Mid/Woofer
    Total Frequency Response28 Hz - 33,000 Hz
    Nominal Impedance8 ohms
    Sensitivity (1 watt @ 1 meter)91 dB
    Lower and Upper -3dB Limits41 Hz - 29,000 Hz
    Recommended Amplifier Power Per Channel10 watts - 200 watts
    Speaker Inputs(1) Pair of Spring-loaded binding posts - Gold-plated
    ShapeRectangle
    Dimensions19.188" (48.74 cm) h x 7.25" (18.42 cm) w
    Flush Mounting Depth3" (7.62 cm)
    WarningProposition 65 Warning for California Residents